PA6-CF

Name: PA6-CF - CroFil 3D
SKU: CROFIL-PLA-1KG-PA6CF
Price: 79.99 EUR
Availability: InStock
Rating: 5.00 (1 reviews)

★★★★★

(1 customer review)

79,99 €
You save

Recommended Printing Settings:
– Nozzle Temperature: 270 – 290 °C
– Bed Temperature: 90 – 100 °C
– Printing Speed: < 100 mm/s

SKU: CROFIL-PLA-1KG-PA6CF Category: 3D Filament Tag: PA6-CF

Opis
Additional information
Reviews (1)

Our PA6-CF is a high-performance industrial filament engineered for the most demanding applications. By combining the toughness of Polyamide 6 (Nylon) with the rigidity of chopped carbon fibers, this material offers an unparalleled strength-to-weight ratio. Perfect for functional parts that must withstand heavy mechanical loads and high thermal environments.

Key Features:

Industrial Strength: Exceptional impact resistance and superior stiffness.
Thermal Resistance: High heat deflection temperature (up to 180°C after annealing).
Premium Finish: Carbon fibers provide a sleek matte surface that effectively masks layer lines.
Dimensional Stability: Significantly reduced warping and shrinkage compared to unfilled nylon.

Usage Note: This material is abrasive. A hardened steel nozzle (0.4 mm or larger) is required. Due to its hygroscopic nature, we strictly recommend drying the filament before use and printing directly from a dry-box.

PA6-CF CROFIL3D

⚙️ Technical Specifications / Tehničke Specifikacije

Feature / Karakteristika	Recommended Value / Preporučena vrijednost
Nozzle Temp / Temperatura mlaznice	270°C – 290°C
Bed Temp / Temperatura podloge	90°C – 100°C
Print Speed / Brzina tiska	< 100 mm/s
Drying / Sušenje	80°C for 8-12 hours
Nozzle Type / Vrsta mlaznice	Hardened Steel / Kaljeni čelik

Specification: PA6-CF

Weight	1,25 kg
Dimensions	21 × 21 × 6,5 cm

1 review for PA6-CF

5.0 out of 5

★★★★★

Write a review

Show all Most Helpful Highest Rating Lowest Rating

★★★★★
3Ding.hr – 24.04.2026
Vrlo lako se printa, bitno ga je dobro posušiti. Testirano na 0.4 hardened steel nozzli.
Za sada imamo par primjeraka koji se nalaze na samom Motoru(Adapteri za TFSI bobine na 1.8T) i savršeno odrađuje svoj dio posla. Sve preporuke!
+ PROS: Trpi temperature 150C i više za dugoročno.
- CONS: Trebate aktivnu grijanu komoru za veće modele i upgrade printera ako već niste.
Helpful(0) Unhelpful(0)You have already voted this